Convert roofing area units including roofing squares, square feet, square yards, square meters, acres, hectares, and more for shingles, roof decking, and roofing estimates.
Roofing squares to square feet:
1 roofing square = 100 ft²
Square feet to roofing squares:
100 ft² = 1 roofing square
Roofing squares to square yards:
1 roofing square = 11.1111 yd²
Square meters to square feet:
1 m² = 10.7639 ft²
Roofing area conversions are useful for roof takeoffs, shingle estimates, underlayment coverage, roof decking, metal roofing, shed roofs, garages, additions, and full roof replacement projects.
Use this converter when switching between square feet, roofing squares, square yards, and metric roof area measurements.
Your result shows the entered roofing area converted from the starting unit into the selected ending unit. The converter also shows the conversion rate used so you can verify the calculation.
For roofing material orders, remember that this converter only changes units. Most roofing jobs still need extra material for starter shingles, ridge caps, hips, valleys, waste, cuts, and layout conditions.
There are 100 square feet in 1 roofing square.
Divide square feet by 100. For example, 2,400 square feet divided by 100 equals 24 roofing squares.
Multiply roofing squares by 100. For example, 18 roofing squares multiplied by 100 equals 1,800 square feet.
No. This converter only changes area units. Roofing waste, cuts, pitch adjustments, and material overage should be added separately.
No. A roofing area converter changes one area unit into another. A roofing calculator may estimate roof area, shingles, bundles, waste, and cost.